University of Notre Dame
Browse
SchuytenSJ022008.pdf (3.61 MB)

Activity and In-Situ Xas Studies of Promoted Copper and Zinc Oxide Catalysts for Hydrogen Production by Methanol Partial Oxidation

Download (3.61 MB)
thesis
posted on 2008-02-18, 00:00 authored by Stephen J. Schuyten
A three step high throughput catalytic screening process was used to evaluate the activity and selectivity of copper and zinc based methanol partial oxidation catalysts. The most active catalyst preparations contained both palladium and zirconium promoters. The high activity and selectivity obtained from the doubly promoted 7Cu/3Zn/1Zr-1Pd composition suggested a synergy between palladium and zirconium promoters.

Characterization studies showed that the zirconia promoter significantly enhanced characteristics such as surface area, dispersion, crystallite size, and deactivation resistance, leading to lowered reduction temperature. However the zirconia promoter alone only slightly lowered the reaction light off temperature. Unlike zirconia, the palladium promoter did not significantly alter microstructural characteristics of the catalyst. Palladium was shown to significantly lower the reduction temperature regardless of initial CuO crystallite size, which suggests that palladium enhances the catalytic activity by increasing copper reducibility. Copper K edge x-ray absorption spectroscopy confirmed palladium promoted catalysts are more easily reduced to Cu0 under reaction conditions. Palladium x-ray absorption spectroscopy was used to determine that formation of Pd-Cu alloys is preferred over Pd-Zn alloys.

Using a four step model reaction pathway it was found that the combination of palladium and zirconia promoters significantly lowers the activation energy of the methanol combustion and steam reforming reactions. However, promoter materials do not influence the methanol decomposition and water gas shift activation energies because of the similarity of catalyst state at high reaction temperatures regardless of promoter materials. In reformer simulations it was found that approximately 5 grams of catalyst is needed to power a notebook computer.

Combustion synthesized catalysts were shown to have activity similar to bulk prepared catalysts, despite lower copper area, suggesting higher turn over rate. It was found that changing the palladium loading to the surface from the bulk did not significantly affect catalytic activity, most likely due to encapsulation of Pd by alloying with copper. An exploration of preparing structured catalysts by hydrothermal synthesis methods showed that intimate contact of copper with certain oxide phases is required for high activity.

History

Date Modified

2017-06-05

Defense Date

2008-02-13

Research Director(s)

William F. Schneider

Committee Members

Eduardo. E. Wolf William F. Schneider Jeffrey T. Miller Alexander Mukasyan Paul McGinn

Degree

  • Doctor of Philosophy

Degree Level

  • Doctoral Dissertation

Language

  • English

Alternate Identifier

etd-02182008-155212

Publisher

University of Notre Dame

Program Name

  • Chemical Engineering

Usage metrics

    Dissertations

    Categories

    No categories selected

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC